If you are looking for a solution to save energy and lower your costs for cooling and heating, you should consider using oil-free roots. These types of systems will help you cut costs for heating and cooling, even when you have an oil-filled furnace or fuel-powered air conditioner. However, what kind and weight of oil should you use in your Blower? Let’s look at the following options.
Canister Oil Filters
If you’re using a canister filter, which is a good option if you want a cost-effective solution for heating and cooling, then the filter you use will determine what kind and weight of oil you use. There are many kinds of canister filters available, so you’ll need to do some research. In general, you should use about one quart for every five thousand gallons of water used. For example, if you use four quarts of water per week, you should use a quart of oil for every twenty-five hundred gallons. This may be a bit of a stretch for many people, but it’s worth investigating.
In addition to what kind and weight of oil you should use, you also need to know what kind of oil is right for your unit. It’s best to stay away from vegetable oil. It will clog up the system, so you’ll need to change it out with mineral oil. It’s better to use something similar to vegetable oil because it will still pass through some of the more stringent filters designed for conventional units. Mineral oil is also not as readily available as compared to other types of efficient useable oil.
Forced Oil Filters
Units that use a forced-oil method to cool your air conditioner’s coils should be limited to less than twenty quarts of oil. This type of filter will have to be changed when the unit reaches its cool-down temperature, which can take up to five hours. This is easily the longest cool-down period of any air-conditioning unit. The only downside to forced oil filters is that they can be noisy.
Gel Oil Filters
This is one of the most efficient filters, as it will absorb cool air quickly and thoroughly. However, it’s the kind of filter that may not be as easy to replace. Since it’s composed of a gel, it tends to run a little hot, which can cause a coolant build-up if you don’t change the filter soon enough. Changing this filter requires taking apart the whole unit and reassembling it. There’s no way around this potential problem unless you’re willing to pay someone to come and change it for you.
Silicone Oil Filters
This is the type of roots blower oil filter that you’ll want to use if you live in an area where the air conditioner isn’t likely to run very long. These units are the most widely available on the market and the best choice. These units are also the easiest to replace. Drain the oil from your air conditioner, remove the drain plug, and replace the old filter. You’ll save money by never having to buy a new air conditioner again.
Kerosene Oil Filters
These are the most expensive kind of air conditioner filters, and they are worth every penny. These units offer excellent moisture removal properties, but they tend to require a lot of maintenance to keep them working properly. They do, however, come with an extreme benefit: they will last a very long time without ever needing to be replaced. The only real disadvantage of these units is that they must constantly maintain them to ensure their proper function to perform results much better than from current standing.
When you are looking for what kind and weight of oil you use in your car, remember that it’s important to pay attention to the quality of the product. This may not seem important to you right now, but you should seriously consider using good oil. Cheap oil tends to break down quickly and ruin your engine if it gets too much into it. Save yourself the hassle of frequent oil changes by finding a high-quality brand that will keep your engine running smoothly for years to come.